DT SWISS Drive Side End Cap For Shimano Microspline Freehubs (QR)
Drive side end cap for converting DT SWISS hubs to Shimano MTB drivetrain that uses QR axle system.
In stock
R300.00
In stock
- Axle system: 5mm Quick Release / RWS
- Weight [g]: 8
- Compatibility: DT SWISS Freehub for Shimano 12spd (Microspline)
- Pairs with: HWRABL00S2148S and HWRABM00S2863S
- Converts: DT SWISS 180, 240, 440 and 350 road or MTB hubs in Classic or Straightpull to Shimano 12spd drivetrain in either 130mm or 141mm spacing
- Refer to our DT SWISS FAQ page for end cap solution charts with full list of convertible hubs and wheels
| Brands | |
|---|---|
| Axle System | |
| Drivetrain |
You may also like…
-
DT Swiss, Freehubs
DT SWISS Shimano 12spd Freehub For Star Ratchet & EXP
Replacement Shimano 12spd (Microspline) freehub DT Swiss Star Ratchet equipped hubs
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
NOTE: This product is compatible with Star Ratchet as well as Ratchet EXP
SKU: HWRABL00S2148S -
DT Swiss, Freehubs
DT SWISS Shimano 12spd (Microspline) Freehub For 3-pawl Hubs
Replacement Shimano Microspline freehub for DT Swiss 3-pawl equipped hubs
If you require the matching end cap for drive train conversions:
-
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
SKU: HWRABM00S2863S -
Related products
-
DT Swiss, Endcaps
DT SWISS 12mm End Caps For Shimano HG Rear Hubs
Rear hub end caps used by DT SWISS Star Ratchet hubs for 12x142mm, 12x157mm or 12x197mm spacing with Shimano freehub.
Works with OEM brands using DT SWISS Star Ratchet internals such as Roval, Syncros, Giant, SRAM etc
SKU: HWGXXX0002193C -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
