e*13 BB92 Bottom Bracket – 24mm Spindle
BB92 bottom bracket uses industry-exclusive, dual-row bearings to fit big performance into a small BB shell, with a center tube to seal the BB shell.
In stock
R375.00
In stock
- Compatibility: BB92 = 41mm shell diameter
- Features: BB92: Industry-exclusive dual-row bearings maximize durability.
- Size: BB1USA-102 – BB92 PRESSFIT Bottom Bracket for 68/73mm & 83mm shell BB92 frames. For 24mm crank spindles.
- Spindle: 24mm (Base)
- Weight: BB92: 92g
| Brands | |
|---|---|
| Discipline |
Related products
-
Black Friday, e*13, Cassettes
e*13 Helix Race 12 spd 9-52 Cassette
Helix R 9-52T Cassettes are engineered to deliver precision shifting performance with Shimano, SRAM, and TRP 12s drivetrains equally with an industry leading 578% gear range.
e*thirteen’s proprietary 9T smallest cog combined with the new 52t largest cog enables the use of a smaller chainring for improved clearance, lighter system weight and a lower bail out gear ratio without high gear compromise.
The unique 2-part design, with 2 alloy largest cogs and 10 chromoly cogs, supports replacing individual clusters as they wear, which lowers cost and waste while maintaining optimal performance.
Forged and CNC optimized from SCM445 Steel and AL-7075-T651 alloy, Helix R 9-52T cassettes are light enough for weight conscious trail bikes at just 392g, yet tough enough to take the abuse of high-powered e-bikes. Future proof your ride and expand your range, without compromises, with the Helix R 9-52T. Available in the full Helix color range, including long wearing Intergalactic PVD.
SKU: FW2HRA-122 -
Black Friday, e*13, Pedals
e*13 Base Pedal
Base Pedals deliver biting traction, and at price point that doesn’t hurt.
Drawing from the pin layout on our first LG1 Plus and LG1 Race pedals, our newest Base composite pedals use the exact same 22-pin pattern in order to achieve the same biting traction our first pedals were so well known for.
The 100 x 110mm composite platform houses the 22 pins (11 per side), an inboard bushing + outboard bearing, and steel axle. This combination spins smooth, and will last for years to come.
SKU: n/a -
Race Face, Bottom Brackets
Race Face BSA 30
The Race Face BSA 30mm Bottom Bracket was made to work with their 30mm Cinch interface system. The Cinch system uses a 30mm spindle to provide a stiffer bottom bracket/crankset interface, but previously this would limit you to BB30/PF30 frames not with Cinch! These new BSA 30 bottom brackets will allow you to fit your Race Face Cinch 30mm spindle crankset in a standard threaded bottom bracket. Don’t let your bottom bracket shell width keep you from experiencing 30mm spindles!
SKU: BB19BSA687330
