DT SWISS Aerolite® – Straight Pull – T-head – Double Butted (Bladed)
DT Aerolite is the lightest flat spoke in the DT Swiss spoke range with excellent aerodynamic characteristics and a very high stability. The center piece is first reduced and butted to a light 1.5 mm during the cold forging process and subsequently it is bladed. This process again increases the strength of the material and generates the flat shape. This spoke fits hubs with standard spoke holes. Weight: 278 g for 64 spokes at a length of 264 mm.
In stock
R65.00
- Product Family: DT Aerolite®
- Product Type: T-head
- Blading: Bladed
- Reduction: Double butted
- Colour: Black
- Ebike Use: NO
Dimensions:
- Thread 2.0 / FG 2.3
- Length [mm] 194 – 310
- Diameter 1 [mm] 2.0
- Diameter 2 [mm] 1.5
- Diameter 3 [mm] 2.0
- Width 1 [mm] 0.9
- Width 2 [mm] 2.3
- Gauges N/A
You may also like…
-
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Alu Nipples – Black
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPAH20150S0100
Related products
-
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub (Boost) – Jbend – 6bolt
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application, the 350 hub is for those who maybe like to ride the trails a little more than drooling over catalogs and specs.
SKU: n/a -
DT Swiss, Freehubs
DT SWISS Shimano HG Freehub For 3pawl Hubs
Replacement Shimano HG freehub for DT Swiss 3pawl hubs
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRABM00S4193S -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
