DT SWISS 350 Hybrid (Ebike) MTB Front Hub (Boost) – Jbend – 6bolt
Reliable, simple and E-bike specific.
With wider spoke flanges, steel freehubs, larger bearings and stronger internals throughout. These are specifically engineered around the high demands of modern E-bikes
In stock
R1,300.00
In stock
- Field of application: Hybrid MTB (E-bike)
- Product type: 350
- Product family: CLASSIC
- Axle system: 15 mm Thru axle
- Built-in dimension: 110mm
- Weight [g]: 207
- Hole count: 32
- Brake interface: Disc brake IS (6-bolt)
For a comprehensive list of all spare parts, both user and technical manuals, as well as available conversion kits applicable to this specific product model view the official DT Swiss support page Contact us should you require any spare parts not listed on our sites
| Brands | |
|---|---|
| Hole | |
| Brake Interface | Disc Brake IS (6-bolt) |
| Axle System | 15mm x 110mm |
| Spoke Interface | Jbend, Classic |
You may also like…
-
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Brass Nipples – Ebike Rated
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPBH20150S0100 -
DT Swiss, Spokes
DT SWISS Alpine III® Spokes – J-Bend – Triple Butted (1.85) – Ebike Rated
DT Alpine III is the spoke with the lowest weight in relation to its stability. This is accomplished through a complex production process. Starting with a spoke of 2.34 mm, the diameter is reduced at the thread to 2 mm and to 1.8 mm in the middle section during the cold forging process. This allows weight savings of 173 g compared to spokes with a constant diameter. Despite the light centre piece, DT Alpine III is very durable and is perfectly suited for the big loads occurring in high performance e-bike or tandem wheels. Weight: 418 g for 64 spokes at a length of 264 mm.
SKU: n/a
Related products
-
DT Swiss, Front Hubs
DT SWISS 240s Road Front Hub – Straightpull – Non Disc (QR)
The DT Swiss 240s road hub hits the sweet spot between lightweight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
SKU: H24PAAQXR20SA2706S -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub (Standard) – Jbend – 6bolt
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application, the 350 hub is for those who maybe like to ride the trails a little more than drooling over catalogs and specs.
SKU: n/a
