DT SWISS QR End Caps For 350 And 370 Front Hubs
Convert 350/370 front hubs, or wheels equipped with either hub to QR (5x100mm)
Out of stock
R520.00
Out of stock
- Axle system: 5mm Quick Release / RWS
- Weight [g]: 27.6
- Compatibility: 350/370 front hubs
- Converts: 350 and 370 MTB or Road Disc Brake (CL or 6-bolt), Classic or Straightpull front hubs to QR (5mm)
- Refer to our DT SWISS FAQ page for end cap solution charts with full list of convertible hubs and wheels
| Brands | |
|---|---|
| Colour | Black |
| Material | Aluminium |
| Axle System | 5mm x 100mm |
You may also like…
-
DT Swiss, Front Hubs
DT SWISS 350 Road Front Hub – Straightpull – Disc Brake
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application.
SKU: H35PACDXR24SA8673S -
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub Boost – Straightpull – 6bolt
The DT Swiss 350 Straight Pull Disc Front Hub is the perfect hub for the rider looking for the most affordable high performance hub available. High quality bearings and seals provide smooth rotation and durability. The shell is constructed from 7000 series aluminium, and this hub uses straight pull spokes for strong and lightweight performance. 6-bolt disc mount.
SKU: H35PBDIXR28SA9014S
Related products
-
-
-
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
DT Swiss, Endcaps
DT SWISS 12mm End Caps For SRAM XD Rear Hubs
Rear hub end caps used on DT SWISS Star Ratchet hubs for 12x142mm, 12x157mm or 12x197mm spacing with SRAM XD freehub.
Fits Boost/148mm hubs but DOES NOT convert a 142mm/std hub to boost – these hubs just share the same end caps!
SKU: HWGXXX00S3188S
