Product Carousel Tabs
e*13 PF30 Bottom Bracket
Our threaded PF30 BB adapts e*thirteen cranks with 30mm spindle to PF30 BB shells. E*thirteen PF30 BBs are designed to handle even the rigors of downhill use with a solid connection via the threaded center tube to keep cups from walking, even under the hardest impacts.
Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning.
Adapts your Press Fit 30 frame to run e13 DH/XC or Fifteen G cranksets
e*13 BB30 Bottom Bracket
Wider is better with the e*thirteen BB30 bottom bracket. Our threaded BB30 bottom bracket adapts all cranks with 30mm spindle to frames running BB30 BB shells (42mm bore diameter).
The BB30 bottom bracket spaces the bearings nice and wide outside the BB shell for maximum stiffness and a threaded centre tube keeps bearings properly aligned for longer life. Custom seals, grease fill and bearings are designed from the ground up for top-notch durability and smooth spinning.
DT SWISS 240s Road Front Hub – Jbend – Non Disc (QR)
The DT Swiss 240s road hub hits the sweet spot between lightweight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
e*13 TRS Race Semi-Slick Tyre
Roll fast, and corner faster with e*thirteen’s SEMI-SLICK tire. Speed doesn’t always have to come at the cost of traction. We say, “Have your cake, and eat it too.” The tightly-spaced, straight-stacked center knobs provide low surface resistance without reducing traction in heavy braking or climbing situations. Angled sipes soften the side knobs for predictable traction, without allowing the tire to “squirm” or roll under heavy cornering. Finally, directional sipes benefit braking and cornering, without sacrificing durability. Available in a single ply TRS casing, RACE compounds feature soft, tacky cornering knobs and with a longer-wearing center-tread compound.
Race Face Vault Hubs
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost, multiple axle standards and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness and proven 6902 bearings were selected due to their large ball diameter and durability. A 60 tooth drive ring alternately engages six double tooth pawls, giving you 3° engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting these internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster, but adapts faster.
e*13 Vario Dropper Post – No Lever
The Vario™ Infinite Dropper Post is the newest addition to our component line. It uses a proven, gas-charged spring allowing infinitely-adjustable travel, and requires 20% less compression force than the competition. Our unique upper bushing allows travel adjustments in 5mm increments to a 30mm maximum. Travel adjust is tool-free, no need to even remove the post from the bike.
DT SWISS 240s Road Front Hub – Straightpull – Non Disc (QR)
The DT Swiss 240s road hub hits the sweet spot between lightweight and reliability. On the winning end of countless Grand Tour stages and local races alike, these hubs will roll for thousands of nearly frictionless miles.
e*13 Tyre Plasma Sealant – 1L
Tyre Plasma is a uniquely compounded acrylic resin with self cross-linking properties. It’s designed to provide quick and efficient puncture blocking to prevent the loss of air pressure. It’s non-toxic, and cleans up with water, and it won’t break the bank to seal up your tires!
e*13 Rim Tape – 40m
Most tubeless tape has as least one weakness. It doesn’t stick well, leaves a residue when removed, is hard to install, is too thick or too thin. Our tape balances the needs of tubeless users with a purpose designed tape, not just our favourite tape from the hardware store.
e*13 PF30 Bottom Bracket
Our threaded PF30 BB adapts e*thirteen cranks with 30mm spindle to PF30 BB shells. E*thirteen PF30 BBs are designed to handle even the rigors of downhill use with a solid connection via the threaded center tube to keep cups from walking, even under the hardest impacts.
Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning.
Adapts your Press Fit 30 frame to run e13 DH/XC or Fifteen G cranksets
e*13 BB92 Bottom Bracket
Adapts cranks with 30mm spindle to fit a BB92, BB107 and BB121 BB shell. The BB92 BB is a specially made bearing that presses directly into frames, providing a solid base for cranks, even frames with limited crank options. Custom seals, grease fill and angular contact bearings are designed from the ground up for top-notch durability and smooth spinning. All of our BBs include our 1 year, no questions asked bearing guarantee.
Race Face Alloy Crank Boots
Trail riding can be tough on your gear. The ends of your aluminum cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Race Face Next SL Medium & G4 Crank Boots
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Race Face Turbine 31.8mm Stem
The Turbine stem is highly engineered to maximize stiffness, minimize weight, and guarantee your cockpit won’t get overlooked. Featuring aerospace 7075 aluminum alloy, this stem is ideal for high level cross country racers but is strong enough for all mountain epics.
Race Face Direct Mount, Narrow Wide – Cinch Chainring
Direct mount chainring for use with Race Face cranks with CINCH system interface. The Race Face CINCH system allows for easy switching between direct mount rings and spiders, giving you plenty of flexibility for trying out different drivetrain options. Built from aerospace grade 7075-T6 aluminum for excellent durability.
Race Face Next SL Crank Boots – Medium
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
DMR V12 Pedals
Over its 20 years of production the DMR V12 pedal has become recognised as the benchmark for mtb flat pedal performance. We took our iconic V12 body design and redefined it.The new DMR V12 flat pedal offers 10% more surface area than the classic shape. This means better grip and also support for rougher conditions and bigger hits.
Products Carousel
Music
Trending Products
-
RecoveryAir
Therabody RecoveryAir Prime
R10,900.00 This product has multiple variants. The options may be chosen on the product page -
Cranksets
e*13 Helix Core e*Spec Alloy Crank
R1,450.00 This product has multiple variants. The options may be chosen on the product page
-
Spokes
Ruby Straight Gauge J-Bend Spokes
R8.00 This product has multiple variants. The options may be chosen on the product page
-
DT Swiss, Endcaps
DT SWISS Notched Drive Side End Cap For 350 Hubs
R300.00 This product has multiple variants. The options may be chosen on the product page
Bestsellers
Top Categories this Month
Recently Viewed
Therabody RecoveryAir Prime
Our easy-to-use pneumatic compression system makes it accessible for anybody to experience a clinically-proven pressure massage. Simply set your time and pressure, then sit back, relax, and recharge your legs. FastFlush Technology™ enables rapid recovery 2-3x faster than competitors.¹
e*13 Helix Core e*Spec Alloy Crank
Helix Core e*spec cranks give your e-bike an upgrade with high-end integrity and aesthetics at a great value. Engineered for e-MTB strength, so you don’t need to worry about pedal strikes or holding back on your next gravity run. Forged aluminum arms keep you confident on the trail, while alloy self-extracting crank bolts mean efficient routine service, and minimum added weight. Added details like pedal washers, molded impact boots, and e-rider preferred shorter lengths deliver all the high-end features you’d expect from a crankset well over its price.
Therabody RecoveryTherm Cube
Introducing RecoveryTherm™ Cube — a compact, reusable device that delivers instant cold, heat and contrast therapies scientifically proven to treat injuries, relieve pain, reduce inflammation and maximize muscle and joint recovery. Powered by our proprietary Cryothermal Technology™, Cube’s simple preset treatments use scientifically-optimized temperatures and durations for effective relief and recovery anywhere on the body. Plus, Cube is wearable, portable and convenient for relief anytime you need it.
Ruby Straight Gauge J-Bend Spokes
Ruby spokes offer unbeatable durability and strength while being budget-friendly. Perfectly suited for trail, enduro, and ebikes, Ruby spokes ensure ultimate performance and reliability on any terrain. Whether you’re conquering challenging trails or embarking on an electrifying adventure, trust Ruby’s commitment to delivering premium quality at an affordable price.
Therabody PowerDot Duo 2.0 Smart Muscle Stimulation with Double Cable – Red
This powerful muscle stimulator packs the proven concepts of NMES & TENS into a sleek lightweight pod you can use anywhere. Fully controlled by the PowerDot app, it takes the guesswork out of electrical muscle stimulation by guiding and customizing your intensity and pad placement. Trusted by everyone from the world’s top athletes, to fitness enthusiasts, and beyond.
Therabody PowerDot Buttefly Back Pad
The all-new PowerDot 2.0 Butterfly Pad allows you to easily apply soothing muscle stimulation to your back. Simply connect one pod and lead cable to the pad and apply to the area you are looking to relieve pain or improve recovery on.
Powerdot Replacement Pad Red
Treat your back pain at home with the PowerDot Butterfly Back Pad. But when it’s starting to look a little worse for wear and not attaching as well, breathe some life into your butterfly with the PowerDot 2.0 Replacement Electrode Pads.
It’s very easy to tell when you should be replacing your pads. Electrode pads will last for 25 to 30 uses depending on the amount of oil on your skin, though wiping your skin clean before you use the muscle stimulator can help extend this number. Replace your pads when they no longer stick to your skin, or if the sticky side is covered in lint.
For optimum performance of your PowerDot Muscle Stimulator make sure your electrode pads are sticky, clean, and functioning properly. When you notice the recruitment of muscle is starting to diminish or becomes slightly uncomfortable, that might be a sign as well.
Therabody PowerDot Uno
This powerful muscle stimulator packs the proven concepts of NMES & TENS into a sleek lightweight pod you can use anywhere. Fully controlled by the PowerDot app, it takes the guesswork out of electrical muscle stimulation by guiding and customizing your intensity and pad placement. Trusted by everyone from the world’s top athletes, to fitness enthusiasts, and beyond.
e*13 Bosch Gen 4 53/55 Direct Mount Steel Chainring
e*13 new direct mount chainrings feature a new M3 narrow-wide tooth profile, reducing weight without sacrificing chain-retention.
Adapting technologies from their SL and UL chainrings, e*thirteen has designed new chainrings to function with Bosch Gen 4 e-bike system.
e*13 Helix Race Alu 42-52t
Unlike SRAM & Shimano, e*13 Helix Race cassettes have replaceable gear clusters. That means ongoing service and replacement costs will be less than half that of SRAM or Shimano cassettes. As an added bonus, Helix Race 12s clusters are backward compatible with and can be used to upgrade your existing Helix or TRS+ 9-50T cassette. The 43-52T aluminum section will fit on your old 9-50T steel section for increased range.
When installing the Helix Race cassette, as with any cassette, we recommend checking chain wear. If your chain shows 0.5% or more wear, you will significantly decrease the wear life of your new cassette. Installing a new chain with your new cluster is a much better and more economical solution.
TheraFace Pro Hot & Cold Rings
This complete set of hot and cold therapy rings is powered by our innovative Cryothermal Technology™ and compatible with TheraFace PRO (not included). Reduce puffiness under eyes, tension, pain, and inflammation with three temperature options per ring. The cold ring can even be used simultaneously with TheraFace’s percussive attachments for an even more customized routine.