DT SWISS 180 MTB Front Hub (Boost) – Straightpull – Centrelock
Lighter, stiffer, more precise and easier to maintain – the strengths of the 180 hub are further enhanced with the new RATCHET EXP technology. The ultra-reliable freehub system transfers the highest pedaling loads resulting in direct power transmission. Smooth-running SINC Ceramic bearings bring the decisive advantage with their extremely low rolling resistance. DT Swiss 180 hubs – the ultimate in lightweight, stiffness and durability.
Out of stock
R5,200.00
Out of stock
- Field of application: MTB
- Product type: 180
- Product family: Straightpull
- Axle system: 15mm Thru axle
- Built-in dimension: 110mm
- Weight [g]: 94
- Hole count: 28
- Brake interface: Centre Lock (CL)
For a comprehensive list of all spare parts, both user and technical manuals, as well as available conversion kits applicable to this specific product model view the official DT Swiss support page Contact us should you require any spare parts not listed on our sites
| Brands | |
|---|---|
| Axle System | |
| Brake Interface | |
| Holes | |
| Spoke Interface |
You may also like…
-
DT Swiss, Rear Hubs
DT SWISS 180 MTB Rear Hub (Boost) – Straightpull – Centrelock
Lighter, stiffer, more precise and easier to maintain – the strengths of the 180 hub are further enhanced with the new RATCHET EXP technology. The ultra-reliable freehub system transfers the highest pedaling loads resulting in direct power transmission. Smooth-running SINC Ceramic bearings bring the decisive advantage with their extremely low rolling resistance. DT Swiss 180 hubs – the ultimate in lightweight, stiffness and durability.
SKU: H18PTCDRR28SA3180S
Related products
-
Race Face, Wheels, Front Hubs, Rear Hubs, Hubs
Race Face Vault Hubs
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost, multiple axle standards and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness and proven 6902 bearings were selected due to their large ball diameter and durability. A 60 tooth drive ring alternately engages six double tooth pawls, giving you 3° engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting these internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster, but adapts faster.
SKU: n/a -
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub (Standard) – Jbend – 6bolt
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application, the 350 hub is for those who maybe like to ride the trails a little more than drooling over catalogs and specs.
SKU: n/a -
DT Swiss, Spokes
DT SWISS Revolution® – J-Bend – Double Butted (1.5)
In terms of weight, DT Revolution is the lightest round spoke in the DT Swiss spoke range! The diameter of the middle section is reduced to 1.5 mm during the cold forging process. This slim centre piece saves 161 g in weight compared to spokes with a constant diameter. Its use is very versatile due to the ideal ratio between stability and low weight. DT Revolution is a reliable partner for anyone looking for a light wheel in a classic design. Weight: from 283 g for 64 spokes at a length of 264 mm.
SKU: n/a -
DT Swiss, Front Hubs
DT SWISS 350 Road Front Hub – Straightpull – Disc Brake
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application.
SKU: H35PACDXR24SA8673S -
DT Swiss, Front Hubs
DT SWISS 240 MTB Front Hub (Boost) – Straightpull – 6bolt
The new 240 is developed for riders with the most extreme ambitions. The latest version of the hub is equipped with the Ratchet EXP system to maximize reliability. The increased bearing distance increases bearing lifetime, the straight spring provides more direct engagement, which reduces wear, and a smaller number of parts not only makes maintenance easier but also reduces weight.
SKU: H24PBDIXR28SA4928S
