DT SWISS 350 MTB Front Hub (Standard) – Jbend – 6bolt
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application, the 350 hub is for those who maybe like to ride the trails a little more than drooling over catalogs and specs.
In stock
R1,050.00
- Field of application: MTB
- Product type: 350
- Product family: CLASSIC
- Axle system: 15 mm Thru axle
- Built-in dimension: 100mm
- Weight [g]: 172
- Hole count: 28 / 32
- Brake interface: Disc brake IS (6-bolt)
For a comprehensive list of all spare parts, both user and technical manuals, as well as available conversion kits applicable to this specific product model view the official DT Swiss support page
Contact us should you require any spare parts not listed on our sites
| Brands | |
|---|---|
| Holes | |
| Brake Interface | Disc Brake IS (6-bolt) |
| Colour | Black |
| Material | Aluminium |
| Axle System | 15mm x 100mm |
| Spoke Interface | Jbend, Classic |
Related products
-
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub (Boost) – Jbend – 6bolt
Reliability, Versatility & Less Weight!
Thanks to the proven Ratchet freewheel system, the 350 hub is a reliable partner for every adventure. The 36 toothed pulleys ensure a direct power transmission. The well thought-out, yet simple design of the hub allows for a low weight with excellent rolling characteristics. Moreover, it not only allows the cyclist to maintain his freewheel system without special tools, but also to convert it to the different standards. The aim with the 350 was to develop a reliable hub that supports cyclists in their independence.
SKU: n/a -
DT Swiss, Freehubs
DT SWISS Shimano HG Freehub For 3pawl Hubs
Replacement Shimano HG freehub for DT Swiss 3pawl hubs
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRABM00S4193S -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub (Boost) – Straightpull – 6bolt
Reliability, Versatility & Less Weight!
Thanks to the proven Ratchet freewheel system, the 350 hub is a reliable partner for every adventure. The 36 toothed pulleys ensure a direct power transmission. The well thought-out, yet simple design of the hub allows for a low weight with excellent rolling characteristics. Moreover, it not only allows the cyclist to maintain his freewheel system without special tools, but also to convert it to the different standards. The aim with the 350 was to develop a reliable hub that supports cyclists in their independence.
SKU: H35PBDIXR28SA8974S
