DT SWISS 350 Hybrid (Ebike) MTB Rear Hub (Boost) – Jbend – 6bolt
Reliable, simple and E-bike specific.
With wider spoke flanges, steel freehubs, larger bearings and stronger internals throughout. These are specifically engineered around the high demands of modern E-bikes
Out of stock
R4,300.00
Out of stock
- Field of application: Hybrid MTB (Ebike)
- Product type: 350
- Product family: CLASSIC
- Axle system: 12mm Thru axle
- Built-in dimension: 148mm Boost
- Weight [g]: 390
- Hole count: 32
- Free hub body (default): Shimano HG Steel
- Freehub system: Star Ratchet 24T
- Brake interface: Disc IS (6-bolt)
For a comprehensive list of all spare parts, both user and technical manuals, as well as available conversion kits applicable to this specific product model view the official DT Swiss support page Contact us should you require any spare parts not listed on our sites
| Brands | |
|---|---|
| Holes | |
| Brake Interface | Disc Brake IS (6-bolt) |
| Axle System | 12mm x 148mm |
| Drivetrain |
You may also like…
-
DT Swiss, Spokes
DT SWISS Alpine III® Spokes – J-Bend – Triple Butted (1.85) – Ebike Rated
DT Alpine III is the spoke with the lowest weight in relation to its stability. This is accomplished through a complex production process. Starting with a spoke of 2.34 mm, the diameter is reduced at the thread to 2 mm and to 1.8 mm in the middle section during the cold forging process. This allows weight savings of 173 g compared to spokes with a constant diameter. Despite the light centre piece, DT Alpine III is very durable and is perfectly suited for the big loads occurring in high performance e-bike or tandem wheels. Weight: 418 g for 64 spokes at a length of 264 mm.
SKU: n/a -
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Brass Nipples – Ebike Rated
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPBH20150S0100
Related products
-
Race Face, Wheels, Front Hubs, Rear Hubs, Hubs
Race Face Vault Hubs
The super fast engagement of Vault, now available for your custom wheel builds. Available in Boost and non-Boost, multiple axle standards and Shimano or XD cassette bodies. An oversized hub shell increases torsional and lateral stiffness and proven 6902 bearings were selected due to their large ball diameter and durability. A 60 tooth drive ring alternately engages six double tooth pawls, giving you 3° engagement for near-instant power transfer. Wide bearing placement was designed to decrease load on the bearings, improving lifespan. Protecting these internals are low-drag labyrinth seals designed specifically for the Vault hubs. Finish it off with tool-free endcap swaps and you have a hub that not only moves faster, but adapts faster.
SKU: n/a -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S
