DT SWISS Aero Comp® – Jbend – Double Butted (Bladed)
The middle section of this spoke is first butted through cold forging. This makes it more lightweight and stronger. In a further complex process, it is bladed to optimize the aerodynamic characteristics while increasing the material strength. DT Aero Comp guarantees a balanced ratio of stiffness, aerodynamics and durability. This spoke fits hubs with standard spoke holes. Weight: 380 g for 64 spokes at a length of 264 mm.
In stock
R35.00
- Product Family: DT Aero Comp®
- Product Type: Jbend
- Blading: Bladed
- Reduction: Double butted
- Colour: Black
- Ebike Use: NO
Dimensions:
- Thread 2.0 / FG 2.3
- Length [mm] 194 – 310
- Diameter 1 [mm] 2.0
- Diameter 2 [mm] 1.8
- Diameter 3 [mm] 2.0
- Width 1 [mm] 1.2
- Width 2 [mm] 2.3
- Gauges N/A
You may also like…
-
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Alu Nipples – Black
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPAH20150S0100
Related products
-
DT Swiss, Spokes
DT SWISS Champion® – Straight Pull – Straight Gauge
Different available diameters allow for a wide range of uses: in its 1.8 mm version, the DT Champion shines in road or light off-road uses. The 2.0 mm option covers the whole spectrum from reliable road wheels to MTB-Gravity wheels. Finally, the 2.34 mm DT Champion is perfectly suited to the big loads occurring in high performance e-bike and tandems wheels. Weight: from 359 g for 64 spokes at a length of 264 mm.
SKU: n/a -
DT Swiss, Freehubs
DT SWISS Shimano HG Freehub For 3pawl Hubs
Replacement Shimano HG freehub for DT Swiss 3pawl hubs
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRABM00S4193S -
DT Swiss, Spokes
DT SWISS Aerolite® – Straight Pull – T-head – Double Butted (Bladed)
DT Aerolite is the lightest flat spoke in the DT Swiss spoke range with excellent aerodynamic characteristics and a very high stability. The center piece is first reduced and butted to a light 1.5 mm during the cold forging process and subsequently it is bladed. This process again increases the strength of the material and generates the flat shape. This spoke fits hubs with standard spoke holes. Weight: 278 g for 64 spokes at a length of 264 mm.
SKU: n/a -
