DT SWISS Aero Comp® – Straight Pull – T-Head – Double Butted (Bladed)
DT Aerolite is the lightest flat spoke in the DT Swiss spoke range with excellent aerodynamic characteristics and a very high stability. The center piece is first reduced and butted to a light 1.5 mm during the cold forging process and subsequently it is bladed. This process again increases the strength of the material and generates the flat shape. This spoke fits hubs with standard spoke holes. Weight: 278 g for 64 spokes at a length of 264 mm.
In stock
R40.00
- Product Family: DT AeroComp®
- Product Type: Straightpull
- Blading: Bladed
- Reduction: Double butted
- Colour: Black
- Ebike Use: NO
Dimensions:
- Thread 2.0 / FG 2.3
- Length [mm] 194 – 310
- Diameter 1 [mm] 2.0
- Diameter 2 [mm] 1.5
- Diameter 3 [mm] 2.0
- Width 1 [mm] 0.9
- Width 2 [mm] 2.3
- Gauges N/A
You may also like…
-
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Alu Nipples – Black
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPAH20150S0100
Related products
-
DT Swiss, Spokes
DT SWISS Alpine III® Spokes – J-Bend – Triple Butted (1.85) – Ebike Rated
DT Alpine III is the spoke with the lowest weight in relation to its stability. This is accomplished through a complex production process. Starting with a spoke of 2.34 mm, the diameter is reduced at the thread to 2 mm and to 1.8 mm in the middle section during the cold forging process. This allows weight savings of 173 g compared to spokes with a constant diameter. Despite the light centre piece, DT Alpine III is very durable and is perfectly suited for the big loads occurring in high performance e-bike or tandem wheels. Weight: 418 g for 64 spokes at a length of 264 mm.
SKU: n/a -
DT Swiss, Spokes
DT SWISS Revolution® – J-Bend – Double Butted (1.5)
In terms of weight, DT Revolution is the lightest round spoke in the DT Swiss spoke range! The diameter of the middle section is reduced to 1.5 mm during the cold forging process. This slim centre piece saves 161 g in weight compared to spokes with a constant diameter. Its use is very versatile due to the ideal ratio between stability and low weight. DT Revolution is a reliable partner for anyone looking for a light wheel in a classic design. Weight: from 283 g for 64 spokes at a length of 264 mm.
SKU: n/a -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S
