DT SWISS Drive Side End Cap For Ratchet EXP SRAM XDR Freehubs
Drive side adapter that pairs with DT SWISS SRAM XDR freehub to convert 12mm thru axle bikes to the SRAM AXS drivetrains.
Converts both 142mm/standard and 148mm/boost hubs but DOES NOT convert standard hubs to boost, these hubs just share the same end caps!
Out of stock
R315.00
Out of stock
-
DT Swiss, Freehubs
DT SWISS SRAM XDR Freehub For Ratchet EXP Hubs (Ceramic Bearing)
Replacement SRAM XDR ceramic bearing freehub for Ratchet EXP
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRXXX00S3698S
- Axle system: 12mm Through Axle / RWS
- Weight [g]: 5
- Compatibility: DT SWISS Ratchet EXP Freehub for SRAM XDR
- Pairs with: HWAXXX00S3081S
- Converts: 180 hubs in Classic or Straightpull to the SRAM XDR drivetrain
- Refer to our DT SWISS FAQ page for end cap solution charts with full list of convertible hubs and wheels
| Brands | |
|---|---|
| Axle System | 12mm x 142mm, 12mm x 148mm, 12mm x 150mm, 12mm x 157mm, 12mm x 190mm, 12mm x 197mm |
| Drivetrain |
You may also like…
-
DT Swiss, Freehubs
DT SWISS SRAM XDR Freehub For Ratchet EXP Hubs (Ceramic Bearing)
Replacement SRAM XDR ceramic bearing freehub for Ratchet EXP
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRXXX00S3698S -
DT Swiss, Rear Hubs
DT SWISS 180 MTB Rear Hub (Boost) – Straightpull – Centrelock
Lighter, stiffer, more precise and easier to maintain – the strengths of the 180 hub are further enhanced with the new RATCHET EXP technology. The ultra-reliable freehub system transfers the highest pedaling loads resulting in direct power transmission. Smooth-running SINC Ceramic bearings bring the decisive advantage with their extremely low rolling resistance. DT Swiss 180 hubs – the ultimate in lightweight, stiffness and durability.
SKU: H18PTCDRR28SA3180S
Related products
-
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
