DT SWISS Squorx Pro Lock® Pro Head® Alu Nipples – Silver (1pc)
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
Out of stock
R6.00
Out of stock
- Field of application: Wheel building
- Recommended to use with DT SWISS professional tool
- Colour: Silver
- Weight [g]: 0.4 ea
- Quantity: Single Nipples or box of 100pcs
- Pairs with: PHR Pro Head® brass washers (sold separately)
- Refer to our DT SWISS FAQ page for further wheel building techniques
| Brands | |
|---|---|
| Thread |
You may also like…
-
DT Swiss, Wheel Nipples
DT SWISS Pro Head® (PHR) Washers
PHR – Pro Head Reinforcement system. The PHR system increases the load-bearing surface of the nipples on the rim and reduces localized stresses. Peak loads are reduced allowing us to built the rim even lighter. The washer’s shape also acts as a ball joint and automatically aligns the specific DT Squorx Pro Head® ball head nipples with the spoke further, reducing the risk of spoke failure or rim cracking.
SKU: WSZXX10051297S
Related products
-
DT Swiss, Front Hubs
DT SWISS 350 MTB Front Hub (Boost) – Jbend – 6bolt
Whoever is looking for the most affordable high performance hubs available, should take a very close look at the 350 hub line-up. The same performance as its even higher end cousins comes with slightly less weight optimized parts to offer the same reliability at a much lower cost. Being available in all standards and for any application, the 350 hub is for those who maybe like to ride the trails a little more than drooling over catalogs and specs.
SKU: n/a -
DT Swiss, Freehubs
DT SWISS Shimano HG Freehub For 3pawl Hubs
Replacement Shimano HG freehub for DT Swiss 3pawl hubs
If you require the matching end cap for drive train conversions:
- Scroll down to product Description below
- Click on the tab labeled “Accessories”
- Select which end cap you need with a blue check mark
- Click on “add all to cart” on the right
Don’t have the end cap you need? Contact Us and we will do our best to assist you
SKU: HWRABM00S4193S -
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
DT Swiss, Wheel Nipples
DT SWISS Squorx Pro Lock® Pro Head® Brass Nipples – Ebike Rated
DT Squorx Pro Head nipples combine ease of use, lightweight and optimum performance in a single product. The DT Pro Head shape combined with both a torx and a square tool interface makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. Available with or without the integrated DT Pro Lock threadlock system.
SKU: NPBH20150S0100 -
DT Swiss, Wheel Nipples
DT SWISS Standard Brass Nipples – Black (1.8mm Thread)
The DT standard nipple is the choice for the wheel project looking to save some weight. The nipples are available with or without DT Pro Lock, the patented liquid inside the nipple thread, which makes the connection between nipple and spoke extremely durable. It pairs perfect with any wheel application looking for colours as well. Available in multiple lengths.
SKU: N0BA1812050100
