DT SWISS Tubeless Valve For 65-80mm Rims
DT Swiss tubeless valves for rims with 65-80mm height such as DT Swiss ARC wheels
In stock
R145.00
In stock
- Field of application: Tubeless Conversion
- Weight [g]: 6
- Length [mm]: 106
- Material: Alu
- Compatibility: Rims with 65-80mm height (example: DT Swiss ARC wheels)
- Valve top cap also functions as a valve core removal tool
- Refer to our DT Swiss FAQ page for further info on correct tubeless conversion techniques and maintenance
| Brands |
|---|
You may also like…
-
e*13, Tubeless Sealant
e*13 Tyre Plasma Sealant – 1L
Tyre Plasma is a uniquely compounded acrylic resin with self cross-linking properties. It’s designed to provide quick and efficient puncture blocking to prevent the loss of air pressure. It’s non-toxic, and cleans up with water, and it won’t break the bank to seal up your tires!
SKU: TR1UNA-107
Related products
-
DT Swiss, Endcaps
DT SWISS 15mm End Caps For 350 And 370 Front Hubs
End caps for converting DT SWISS 350 and 370 hubs or wheels using these hubs (1900 and 1700 range) to 15mm thru axle
Converts both 100mm (standard) and 110mm (boost) hubs to 15mm thru axle, but DOES NOT convert standard hubs to boost, or vice versa – these hubs just share the same end caps. To convert to/from Boost one would need to change the hub shell itself
NOTE: DT SWISS hubs are not convertible to boost spacing (110mm) from standard spacing (100mm) and the use of aftermarket products to do so voids the product warranty
SKU: HWGXXX0004785S -
DT Swiss, Wheel Nipples
DT SWISS Pro Head® (PHR) Washers
PHR – Pro Head Reinforcement system. The PHR system increases the load-bearing surface of the nipples on the rim and reduces localized stresses. Peak loads are reduced allowing us to built the rim even lighter. The washer’s shape also acts as a ball joint and automatically aligns the specific DT Squorx Pro Head® ball head nipples with the spoke further, reducing the risk of spoke failure or rim cracking.
SKU: WSZXX10051297S -
-
DT Swiss, Spokes
DT SWISS Revolution® – J-Bend – Double Butted (1.5)
In terms of weight, DT Revolution is the lightest round spoke in the DT Swiss spoke range! The diameter of the middle section is reduced to 1.5 mm during the cold forging process. This slim centre piece saves 161 g in weight compared to spokes with a constant diameter. Its use is very versatile due to the ideal ratio between stability and low weight. DT Revolution is a reliable partner for anyone looking for a light wheel in a classic design. Weight: from 283 g for 64 spokes at a length of 264 mm.
SKU: n/a
