e*13 Crank Bolt & Extractor Tool for 1 Deg Cranks
Replacement crank bolt and extractor tool for e*thirteen cranks using a 1 degree spindle taper. Not compatible with 3 degree cranks.
1 deg cranks can be identified by the laser etching on the non-drive side end of the spindle. All 2015+ cranks use 1 degree taper.
In stock
R150.00
In stock
- Compatibility :Intended to be used on 1 degree cranks. NOTE: 2018 and newer cranks have a built in extractor. Not compatible with 3 degree cranks.
- Included: Bolt, washer, extractor tool
| Brands |
|---|
Related products
-
e*13, Cassettes, Cassette Spares
e*13 Helix Race Alu 42-52t
Unlike SRAM & Shimano, e*13 Helix Race cassettes have replaceable gear clusters. That means ongoing service and replacement costs will be less than half that of SRAM or Shimano cassettes. As an added bonus, Helix Race 12s clusters are backward compatible with and can be used to upgrade your existing Helix or TRS+ 9-50T cassette. The 43-52T aluminum section will fit on your old 9-50T steel section for increased range.
When installing the Helix Race cassette, as with any cassette, we recommend checking chain wear. If your chain shows 0.5% or more wear, you will significantly decrease the wear life of your new cassette. Installing a new chain with your new cluster is a much better and more economical solution.
SKU: FWS20-130 -
e*13, Freehubs
e*13 XCX Freehubs
Replacement freehub bodies to fit all e*thirteen hubs. Replacement drivers are available for our popular TRS/LG1 series hubs as well as our newest line of e*SPEC and XCX hubs. Offered in Sram™ XD™, Shimano™ Microspline™ and the traditional splined 10/11 speed Shimano™ driver.
SKU: n/a -
